How Ongaro Memberships Can Save You Money:
Annual maintenance on your systems provide a safeguard and comfort to you and your family. Neglecting your routine check ups can potentially put everyone at risk. With these annual visits our experienced technicians use the latest technology, to help with finding those unsafe problems before they can become bigger problems.
Whether it’s checking your furnace before the cold season hits, your electrical system for fire safety or your water heater needing to be flushed to ensure you are with Hot Water all year round.
Your equipment is essential to maintain and having a Maintenance Membership helps ensure no costly repairs down the road. A routine annual service not only gives your equipment a longer lifespan but it helps with the efficiency of your systems which can also help with utility bill costs and energy savings. The harder your systems work due to poor maintenance, the higher the costs can be, or may even result in having to replace your systems sooner than expected.
Benefits of an Ongaro Membership:
- 5% discount on repairs (replacement?) - Member rate discount
- Priority scheduling - when calling for emergency service, we prioritize our members
- Reminders - courtesy reminder calls to schedule services
- Annual savings, for plumbing up to $300, Electrical up to $250, PPA Savings of $140.00, PPH Savings of $100, HVAC Savings of $190 and Hydronic Savings of $326.00
- Fast, Free Financing
- Transferable Plans - Ability to transfer annual plans to a new property in our service area or to a new owner
Our Mission is to go beyond just cleaning & checking on your equipment each year. Here’s what you can expect from each visit for your routine maintenance:
“Heating and Cooling Membership”: Annual Savings of up to $190!
Membership Heating service.
- Annual service visit
- Clean and adjust burner assembly
- Check ignition assembly
- Check heat exchanger
- Monitor flue draft
- Test starting capabilities
- Check thermostat
- Measure temperature rise
- Measure for correct air flow
- Clean or replace air filter (standard size)
- Tighten electrical connections
- Measure volt/amp on motors
- Test safety controls
- Check capacitor
- 5% discount on repairs
- Note: additional fee for specialty air filters
Membership with AC service.
- Annual service visit
- Test starting capabilities
- Check thermostat
- Measure for correct airflow
- Clean or replace air filter (Standard Size)
- Tighten electrical connections
- Measure volt/amp on motors
- Monitor refrigerant pressure
- Test Safely Controls
- Check evaporator coil (If accessible)
- Check condensate drains
- Measure temperature difference
- Clean condenser coil
- Check capacitor
- Check sup heat and sub cool
- Measure compressor amp draw
- 5% discount on repairs
Note: additional fee for specialty air filters
“Heating Membership”: Annual Savings of up to $100!
Membership with Heating service only.
- Annual service visit
- Clean and adjust burner assembly
- Check ignition assembly
- Check heat exchanger
- Monitor flue draft
- Test starting capabilities
- Check thermostat
- Measure temperature rise
- Measure for correct air flow
- Clean or replace air filter (standard size)
- Tighten electrical connections
- Measure volt/amp on motors
- Test safety controls
- Check capacitor
- 5% discount on repairs
- Note: additional fee for specialty air filters
“A/C Membership”: Annual Savings of up to $140!
Membership with AC service.
- Annual service visit
- Test starting capabilities
- Check thermostat
- Measure for correct airflow
- Clean or replace air filter (Standard Size)
- Tighten electrical connections
- Measure volt/amp on motors
- Monitor refrigerant pressure
- Test Safely Controls
- Check evaporator coil (If accessible)
- Check condensate drains
- Measure temperature difference
- Clean condenser coil
- Check capacitor
- Check sup heat and sub cool
- Measure compressor amp draw
- 5% discount on repairs
- Note: additional fee for specialty air filters
“Hydronic Membership”: Annual Savings of up to $326!
This membership includes one annual visit to service inspect and test Hydronic systems per year.
- One annual service visit
- Test the sequence of operation on the Boiler
- Test Boiler and system temperatures
- Test closed system water pressure
- Test closed system Boiler Feed Valve for functionality
- Inspect Boiler Expansion Tank and adjust pressure (if needed)
- Inspect DHW Expansion Tank and adjust pressure (if needed)
- Test DHW mixing valve temperature (if applicable)
- Test Condensate drain (flush condensate if needed)
- Test Condensate pump (if applicable)
- Test Gas Valve Manifold pressure (adjust if needed)
- Visually inspect Gas Manifold Burner Assembly (additional cost to clean Manifold Burner Assembly)
- Visually inspect Ignitor
- Visually inspect Flame Sensor
- Visually inspect Hot Surface Ignitor (if applicable)
- Visually inspect for any visible leaks around Boiler and on near Boiler piping
- Test Circulation Pumps amperage draw (replace pump if higher than Manufacturer’s rating)
- Test Zone Valves for functionality
- Visually inspect Air Vents and Air Separator
- Visually inspect Flue Draft for any obstructions and condition
- Test and adjust Thermostat
- Visually inspect Heat Exchanger (additional cost to clean Heat Exchanger)
- Visually inspect Electrical connections
- Test safety controls
- 5% discount on repairs
“Tank Water Heater Membership”:
This membership includes one annual visit to service tank water heaters and inspect plumbing systems once per year.
- Annual service visit
- Test Incoming water pressure
- Water service
- P-traps
- Water supplies
- Toilets
- Faucets and valves
- Inspect water heater burner operation
- Test hot water temperature
- Flush tank water heater
- (Does not include tankless flush solution)
- Check water heater anode
- Flue and combustion air
- Pressure temperature relief and drain
- Pan and drain
- Note all safety and code violations found
- 5% discount on repairs or replacements
“Tankless Water Heater Membership”: Annual Savings of up to $356!
This membership includes one annual visit to service Tankless water heaters and inspect plumbing systems once per year.
- Annual service visit
- Test Incoming water pressure
- Water service
- P-traps
- Water supplies
- Toilets
- Drains
- Faucets and valves
- Descale heat exchanger with solution (30 mins)
- Clean air intake screen
- Clean cold-water inlet screen
- Inspect flame rods
- Inspect/ test hot & cold-water isolation valves functionality
- Inspect/Test T&P safety relief valve
- Gas shut off valve and supply connection
- Discuss any code upgrades or safety concerns
- 5% discount on repairs or replacements
“Electrical Membership”:
Membership with electrical service.
- Annual visit for Electrical Safety Evaluation
- Check and tighten all connections in electrical panels
- Check for any corrosion or heat damage in panels
- Check for proper grounding
- Check for proper bonding
- Test all AFCI/GFCI breakers
- Visual inspection outside to check for exposed wiring
- Check outside for weather proofed devices
- Visual Inspection of attic and crawl space for open
- splices
- Check outlets for proper installation
- Check lighting for functionality
- Test all smoke and Carbon Monoxide detectors for
- functionality
- Note all safety and code violations found
- 5% discounts on repairs or replacements